For newly arrived solar light strips, please use them when there is no direct sunlight and are not in charge, otherwise the light strips will not light up. You can consult customer service for any after-sales issues and serve you at any time.

Specification：

Item: IP68 Waterproof Solar COB Neon Strip

Lamp beads: COB

LED quantity: 320LEDs/m

Voltage: DC24V

Waterproof grade: IP68 waterproof

Neon light width: 9-10MM

FPCB width: 8MM

Color temperature: natural white (4000-4500K), white light (6000-6500K), warm white (3000-3500K),Blue，Ice Blue，Green，Purple，Yellow，Pink，Red

Power: 7-9W/meter

CRI(RA): ＞90

Adhesive: yes

Cutting unit: led strip Can be cut at marked intervals

Length: 0.5m/1m/2m/3m/4m/5m/6M/7M/8M/9M/10M

Power connection interface cord length: 1.2 meter

Lighting Angle: 120 ° ~ 140 °

Power connection interface cord length: About 1.2 meter

Operation temperature: -20℃-+45℃

Storage temperature: -20℃-+60℃

View angle: 180

IP68 waterproof light strips can be placed underwater , such as in fish tanks, swimming pools, etc.

Package includes：

Solar Powered LED Strip Light Kit 

1X IP68 Waterproof COB LED Strip

1X Solar Panel 

Note：

Remember:

When the light strip is delivered, please charge it fully before using it. When using the light strip, please turn on the solar panels in a dark place before turning on them

Note

Installation preparation

‌Site selection requirements

1. Choose a position where the sunlight is directly exposed during the day is ≥6 hours to ensure that the solar panels are not blocked by the sun.

2. The light strip can be hung from the wall, bracket or paved flat on the ground (some models support ground insertion)‌

‌Component Connection

3. Connect the light strip to the solar panel through a waterproof interface to confirm that the buckle is completely locked‌

Models equipped with remote control must first be aligned with the front of the light strip and press any function keys to complete the pairing‌

Charging and startup

‌1. Charging method‌

‌Solar Charging‌: Place the solar panels in the sun during the day to automatically charge (recommended daily charging)‌

‌Emergency cable charging‌: Connect the charging cable through the USB interface to recharge the charge (applicable on rainy days)‌

‌2. Turn on the light to trigger ‌

Press "ON" to Turn it on, press "OFF" to turn it off immediately

3.Power display light

There is a power display, which makes it easier for you to charge solar panels in time

4.8 modes for switching the light strips in solar panels

Conmbination

In Waves

Sepuential

Slow Glow

Chasing/Flash

Slow fade

Twinkle/Flash

Steady On

Maintenance and precautions

‌1. Daily maintenance‌

Regularly wipe the dust on the surface of solar panels with a soft cloth to maintain photoelectric conversion efficiency‌

It is recommended to reclaim indoor storage when it is below -10℃ in winter (except for lithium battery anti-freeze models)

‌2. Troubleshooting‌

Check whether the battery polarity is installed correctly when the light strip is not on (the positive electrode is facing the lamp head/the negative electrode is facing the tail)‌